+- LCKB (https://lckb.dev/forum)
+-- Forum: ** OLD LCKB DATABASE ** (https://lckb.dev/forum/forumdisplay.php?fid=109)
+--- Forum: Guides & Help Section (https://lckb.dev/forum/forumdisplay.php?fid=193)
+---- Forum: Help & Support (https://lckb.dev/forum/forumdisplay.php?fid=157)
+----- Forum: Ep3 Support (https://lckb.dev/forum/forumdisplay.php?fid=150)
+------ Forum: Solved topics (https://lckb.dev/forum/forumdisplay.php?fid=151)
+------ Thread: failed to connect to loginserver (/showthread.php?tid=2511)
- DeChamp3 - 12-11-2013
im having no errors or anything at the server itself, just the client makes me some problems. sl.dta ip is my eth0 ip, same as loginserver,gs,messenger etc.
could it have something to do with the engine.dll?
my config looks like this:
[server]
No=1
IP= my eth0 ip
Port=4001
AllowExternalIP=TRUE
[user DB]
IP=127.0.0.1
DBName=newproject_db_user
User=root
Password=
[Data DB]
IP=127.0.0.1
DBName=newproject_data
User=root
Password=
[Auth DB]
IP=127.0.0.1
DBName=newproject_db_auth
User=root
Password=
[Messenger Server]
IP= my eth0 ip
Port=4112
[Connector Server]
Count=1
[Connector_0]
Number=1
MaxSubNumber=1
IP= my eth0 ip
Port=4006
[block IP]
Number=0
[block Band]
Number=21
Band0=A-211.094.000.000-211.103.255.255
Band1=A-210.072.000.000-210.079.255.255
Band2=B-203.095.000.000-203.095.063.255
Band3=B-203.094.000.000-203.094.063.255
Band4=B-203.092.000.000-203.092.063.255
Band5=B-203.090.000.000-203.090.063.255
Band6=B-203.089.000.000-203.089.063.255
Band7=B-203.087.224.000-203.087.255.255
Band8=B-203.088.000.000-203.088.063.255
Band9=B-203.095.000.000-203.095.063.255
Band10=B-203.091.000.000-203.091.063.255
Band11=C-202.000.110.000-202.000.110.255
Band12=C-192.188.170.000-192.188.170.255
Band13=B-161.207.000.000-161.207.255.255
Band14=B-159.226.001.000-159.226.003.255
Band15=B-159.226.000.000-159.226.255.255
Band16=C-132.246.027.000-132.246.027.255
Band17=C-222.168.000.000-222.168.255.255
Band18=B-222.169.000.000-222.169.255.255
Band19=A219.149.192.000-219.149.255.255
Band20=A219.150.000.000-219.150.031.255
[Auto Block]
; Refresh : ƯÀ œÃ°£¿¡ ÇѹøŸ¿ ÀÚµ¿ ºÃ·ÃÂÇÑ IPžŠž®ŒÂÇÃâ€, œÃ°£ŽÜÀ§
; MaxTry : Refresh µ¿ÇÑ ÇÑ IP¿¡Œ Ã¢±ÙÇÒ Κ ÀÖŽÂ °èÀ Κ
; ExIPxxx.*****.*****.***** : ƯÀ ŸÆÀÌÇÇŽÂ °Ë»ç ŸÈÇÃâ€, °ªÀº ¹«Ã¶°Ç 1·Î Œ³ÃÂۂÞç, Key¿¡ IPžŠÀûÀœ
; ¿¹) 111.222.123.1žŠÃŠ¿ÜÇðÃÂÀÚ ÇÒ¶§,
; ExIP111.222.123.1=1
Refresh=2
MaxTry=5
ExIP211.181.248.133=1
[block ExID]
ExIDdaekbbang=1
it all runs without error in centos and saying connected..
can someone maybe upload his working client side Bin files? nksp,engine & the rest?
because im only getting "failed to connect to loginserver" in the client. i changed sl.dta and everything else too. so far im using
- soryjero - 12-11-2013
try to change ip in sl.dta and sl1.dta i did this and it worked
- DeChamp3 - 12-11-2013
try to change ip in sl.dta and sl1.dta i did this and it worked
i did it but still the same
- zanatie59 - 12-11-2013
too me its the fact I do not bit me logged in
- soryjero - 12-11-2013
i did it but still the same
then revise that sl.dta its the same as loginserver.
in my sl.dta was 7001 port and loginserver was 4001 port.
- Sutz - 12-11-2013
Look in _data (t_clientversion) make sure your client ver is within the allowed version.
also try in linux
service iptables stop
then try connect, if it allows client to connect open login an gs port in iptables
- DeChamp3 - 12-11-2013
Look in _data (t_clientversion) make sure your client ver is within the allowed version.
also try in linux
service iptables stop
then try connect, if it allows client to connect open login an gs port in iptables
thanks i checked both
firewall off and t_clientversion is also not higher or lower
but still same error, i really have no idea what could be wrong, i had no error with the older files and i think i did exactly the same
- myvin - 12-12-2013
You are not alone in this problem :-(
- zanatie59 - 12-12-2013
thank you it works toxic
2
- dateone - 12-12-2013
I have exactly the same problem. I have already tried every single advice here in this thread. No solution so far...