+- LCKB (https://lckb.dev/forum)
+-- Forum: ** OLD LCKB DATABASE ** (https://lckb.dev/forum/forumdisplay.php?fid=109)
+--- Forum: Guides & Help Section (https://lckb.dev/forum/forumdisplay.php?fid=193)
+---- Forum: Help & Support (https://lckb.dev/forum/forumdisplay.php?fid=157)
+----- Forum: Ep3 Support (https://lckb.dev/forum/forumdisplay.php?fid=150)
+------ Forum: Solved topics (https://lckb.dev/forum/forumdisplay.php?fid=151)
+------ Thread: Opening GS in VS2010 (/showthread.php?tid=2938)
- MadMartigan - 04-12-2015
Good morning, I have a simple question to ask. I have Visual Studio 2010 now and i want to edit the gamserver_d file to remove version check at startup. I can load the gs into vs fine but only get hex data not the code data, c# or C++, etc,. I'm sure it is something simple but it has me perplexed atm.
Searched for tuts but none answer or point to what i'm trying to achieve. Any help most welcome.- RomainLastChaos - 04-12-2015
Man you need source and build again gameserver_d
- Nikolee - 04-12-2015
You need to download the Source and then open the Gameserver Project.
But i think u wont get it compiled^^
- MadMartigan - 04-12-2015
ok so not possible at this point then?
Will have to stick to multiclient and not be able to update. Thanks again for replies.- Nikolee - 04-13-2015
Its possible but for someone who tries to open a File in VS which is no Project at all i dont see a point.
I only can advise you to start digin into programming, if you have some experience then you will easily understand how it works^^
- MadMartigan - 04-13-2015
Thanks for reply
. I do have some exp. with programming I'll work on it.- Sutz - 04-16-2015
Hi there.
As your topic has been answered, and from this topic you can solve your problem or already have I am going to move this topic into our Solved section database.
Thankyou,
-LCKB Staff