+- LCKB (https://lckb.dev/forum)
+-- Forum: ** OLD LCKB DATABASE ** (https://lckb.dev/forum/forumdisplay.php?fid=109)
+--- Forum: Guides & Help Section (https://lckb.dev/forum/forumdisplay.php?fid=193)
+---- Forum: Help & Support (https://lckb.dev/forum/forumdisplay.php?fid=157)
+----- Forum: Ep3 Support (https://lckb.dev/forum/forumdisplay.php?fid=150)
+------ Forum: Solved topics (https://lckb.dev/forum/forumdisplay.php?fid=151)
+------ Thread: GameServer Offsets (/showthread.php?tid=3093)
- fliegendeflasche97 - 12-29-2013
heya all.
i use the following offsets for upgrade rates:
[upgrade Rates]
Max ROP III Plus:Byte:0022DD91
Max Smelting Stone:Byte:002421E5
Max CS Plus:Byte:0024252B
Max Extreme Stone Plus:Byte:0024256A
Safe Runes:Byte:0022EC98
Safe HS:Byte:002423B1
HS Rate <= 13(-3 * CurrentPlus + Value):Byte:0022E92D
HS Rate >13:Int32:002422B8
Devil Rune Rate (Need Testing):Byte:00242AD4
HS Upgrade %:Byte:2422B8
Purified Rune Ore (127 MAX):Byte:2686EC
Devil Rune Ore (127 MAX):Byte:26878F
after i safed all or used safe as and choose gameserver_d
and open gameserver editor again there is no change. and offsets are still the same on Hs Rate <=13 Hs Rate >13
Devil Rune Rate P. Rune D.Rune and Safe Runes.
is there another way to change it. ? its bad with runes destroy weapon at +5
and hs and rune upgrade is very bad
- Paramount - 12-29-2013
GS Editor by Wizatek is a bit buggy, I think you should do it via hex editor.
- fliegendeflasche97 - 12-29-2013
i dont know how to do it.
i have hex workshop and tryed to search for the hex value like this one: 00242AD4
but still cant find all the things.
. the other offsets work like level cap. but the upgrade stuff dont change.
- CDWriter - 12-29-2013
Theres your problem, not understanding a hex editor .... get a simple one like
HxD Hexeditor load the file into it .....
goto Search then in the tab Search there is a GOTO option ....
here is where you enter the OFFSET ..... or Hex value ....000991BF
iam using the offset ....Start lvl:Int32:000991BF
you need to convert this into Decimal our have that Hexit program i added to my other releases ...
Hexit
So if you want to change the start level lets say 50 then you would change the decimal vale in hexit and it will give you the Hex Number
00000032 so changing the value there ON the Hex side to 32 then start level will be 50 ....
Sorry i did this in a hurry..................