+- LCKB (https://lckb.dev/forum)
+-- Forum: ** OLD LCKB DATABASE ** (https://lckb.dev/forum/forumdisplay.php?fid=109)
+--- Forum: Off-Topic (The Outer World) (https://lckb.dev/forum/forumdisplay.php?fid=198)
+---- Forum: General Discussion (https://lckb.dev/forum/forumdisplay.php?fid=147)
+---- Thread: Need help with SYS_ERR (/showthread.php?tid=4577)
- cooldude - 11-26-2012
hi all i know that some people have made posts on this but not any of them seam to have a way of fixing it.
The Problem is i am able to bind the ip to 127.0.0.1 fine with no problems but when i want to do it any of the vb ips it dont work like 192.168.56.101 or 192.168.56.1 any one know how to fix this?
Bind 127.0.0.1
Bind: 192.168.56.1
My network adapter is set to Bridged Adapter is the any other network setting i may need to edit in the Linux or any where?
- zhuk - 11-26-2012
If it's a vds console, just reboot it and it will work fine.
- Garfield - 11-26-2012
you kill a Messenger
and start a messenger now
- cooldude - 11-26-2012
If it's a vds console, just reboot it and it will work fine.
dont help
- Noizy - 11-26-2012
xD simple, just not set a outside ip from PC, just type: ifconfig and type first IP adress
- cooldude - 11-26-2012
xD simple, just not set a outside ip from PC, just type: ifconfig and type first IP adress
yes but then how do i cnet from my pc to vb if im not useing an out side ip?
- Sutz - 11-26-2012
Messenger can be on 127.0.0.1
- Wizatek - 11-26-2012
U can use a second network adapter and configure it on eth1
At virtualbox go to your settings, then to network, then select the tab Adapter2 and choose Host Only Adapter
Then in the gues os set the ip address of the new network card and u can bind to that whatever u want.
- pwesty - 12-08-2012
@2 i have that same setup adapter1 is nat and adapter2 is host only,
adapter2 gets a router like ip(192.168.56.10x)
that enables anyone on my network to connect to game but still doesnt let me set my real ip for gameserver still shows sys_err bind, am i missing something ?