+- LCKB (https://lckb.dev/forum)
+-- Forum: ** OLD LCKB DATABASE ** (https://lckb.dev/forum/forumdisplay.php?fid=109)
+--- Forum: Guides & Help Section (https://lckb.dev/forum/forumdisplay.php?fid=193)
+---- Forum: Help & Support (https://lckb.dev/forum/forumdisplay.php?fid=157)
+----- Forum: Ep4 Support (https://lckb.dev/forum/forumdisplay.php?fid=128)
+----- Thread: Convert to DX9 (/showthread.php?tid=4869)
Pages:
1
2
- nicolasg - 03-18-2022
Hi, Someone have any guide or some hint for convert lc to dx9 using 2 of crosire?
- Veni - 03-18-2022
Uhm, there is no real conversion.
You compile the dll, put it into your lc, change d3d8.dll to the d3d8to9.dll and thats it.
- nicolasg - 03-18-2022
Thanks for the info /index.php?/profile/20534-veni/&do=hovercard" data-mentionid="20534" href="/index.php?/profile/20534-veni/" rel="">@Veni, excuse my ignorance, so that's it? Some servers advertise dx9 as a cure-all, do you really get any noticeable improvement?
- Veni - 03-18-2022
You can get some performance improvements that you probably will only notice when benchmarking it. You could get a little bit more performance boost from actually upgrading afaik, but its still not much and not worth for most.
Tweaking other stuff in the client might give you more of a performance boost.
- Desarija - 03-19-2022
A true conversion takes way more than that, but this dll can indeed get ur players a few more fps
- Veni - 03-19-2022
4 hours ago, Desarija said:
A true conversion takes way more than that, but this dll can indeed get ur players a few more fps
Well ya, but you don't need the dll then, if you are going for a full conversion.
- Vladi - 03-20-2022
On 3/19/2022 at 8:16 AM, Veni said:
Well ya, but you don't need the dll then, if you are going for a full conversion.
Hi do you know how to block fps in game?
- Revenge - 03-20-2022
?
- nicolasg - 03-20-2022
removed
- Scura - 03-23-2022
There was a huge discussion where /index.php?/profile/2-wizatek/&do=hovercard" data-mentionid="2" href="/index.php?/profile/2-wizatek/" rel="">@Wizatek too took part and said many interesting stuff... it was on EPVP if i didn't remember bad
In order to optimize LC you should change the data stream, remove the object rendering and so on. You can gain some improvements by using the wrapper, which is still really useful, specially because the game looks smooth than the 8.1b. You already found the wrapper-repository, so i will just leave here the 2 to convert it in a real full-convertion.
P.s. I've loaded the library trough LoadLibrary function in Gfx_Direct3d.cpp !
2