LCKB
Teleport to Juno - Printable Version

+- LCKB (https://lckb.dev/forum)
+-- Forum: ** OLD LCKB DATABASE ** (https://lckb.dev/forum/forumdisplay.php?fid=109)
+--- Forum: Guides & Help Section (https://lckb.dev/forum/forumdisplay.php?fid=193)
+---- Forum: Help & Support (https://lckb.dev/forum/forumdisplay.php?fid=157)
+----- Forum: Ep4 Support (https://lckb.dev/forum/forumdisplay.php?fid=128)
+----- Thread: Teleport to Juno (/showthread.php?tid=4899)

Pages: 1 2


- Desarija - 04-27-2022


Hello,

when I teleport from another world to Juno, it always brings me to the spawn pad (subzone 0) instead of the actual location I tried to go to. It‘s like this when teleporting with rc, premium teleport, npc teleporters and gm command. Teleporting to other worlds works correctly, as well as teleporting from Juno to another place in Juno. I guess it has something to do with the zone ID being 0, but I couldn‘t find the problem in the code yet. My files are based on june sources.

Maybe someone here has had this issue before and can share a solution for it, I would be very thankful ?




- shane - 04-28-2022


look for JUNO_RENEWAL_MESSAGEBOX or ETC_EVENT_JUNO_RENEWAL_MESSAGEBOX_POPUP

remove this definition or the character needs to complete the quest to not be forced to go to extra 6




- Scura - 04-28-2022



13 minutes ago, shane said:




look for JUNO_RENEWAL_MESSAGEBOX or ETC_EVENT_JUNO_RENEWAL_MESSAGEBOX_POPUP



remove this definition or the character needs to complete the quest to not be forced to go to extra 6




as i tought too ... but far as i understood, the problem is go in juno: he always select 0 as subzone! that's mean even if he use the /go_zone command for example to go in juno from dratan, even if he select a subzone != 0 he will be always teleporter on it. 




- Desarija - 04-28-2022



3 hours ago, Scura said:




as i tought too ... but far as i understood, the problem is go in juno: he always select 0 as subzone! that's mean even if he use the /go_zone command for example to go in juno from dratan, even if he select a subzone != 0 he will be always teleporter on it. 




exactly, the problem is not at login, but when I come from another zone ? 

/go_zone 0 7 brings me to zone 0 0 instead of 0 7, for example

Even with gm command /go_pc it doesn't take me right next to the player, but to juno spawn, if I do it from another map. But it's only juno, teleporting to other zones it totally fine.




- Lythenica - 04-28-2022


maybe it's some custom code which breaks the function to warp correctly?

I just tested it on mine June and November release and couldn't find an issue on that it works like it suppose to. 

Is it from every zone you warp like 4 1 Dratan proc to like 0 6 ? wanna test some further




- Desarija - 04-28-2022


Yeah, no matter where i am located, if I move to Juno I always land on Randol center. Except if I teleport from Juno to another place in Juno, that works perfectly fine. It doesnt seem to matter which subzone I come from nor which subzone I attempt to reach..

I haven‘t found any custom code that could have something to do with this bug sadly, but I‘ll go through everything again, thank you for testing! ?




- Lythenica - 04-28-2022


/index.php?/profile/18894-desarija/&do=hovercard" data-mentionid="18894" href="/index.php?/profile/18894-desarija/" rel="">@Desarija ok thanks for that information. My Server has Custom code in it so it could be tha i have fixed this issue allready (have no track what i have fixed over the last year) I test it with bare Server files later on. Maybe it's some basic Configuration Error in the Source itself which has been fixed due to my changes I made. If so I'm able to locate the error and Post a sulutions ones I have found it.




- Desarija - 04-28-2022


Thanks for your effort! Really appreciated, keep me informed ?




- Scura - 04-29-2022


LOL ... tested now on Reza 1776, same issue. Seems server doesn't read the correct subzone if the place is juno ? 




- Veni - 04-29-2022


I don't know anything about maps, but could the problem be that the map files/database configuration is just incorrect?

 

If not, use the visual studio debugger on windows to see what "breaks" inside the code itself.