+- LCKB (https://lckb.dev/forum)
+-- Forum: ** OLD LCKB DATABASE ** (https://lckb.dev/forum/forumdisplay.php?fid=109)
+--- Forum: Guides & Help Section (https://lckb.dev/forum/forumdisplay.php?fid=193)
+---- Forum: Help & Support (https://lckb.dev/forum/forumdisplay.php?fid=157)
+----- Forum: Ep4 Support (https://lckb.dev/forum/forumdisplay.php?fid=128)
+----- Thread: The client does not start (/showthread.php?tid=5001)
Pages:
1
2
- Tesebo - 12-25-2022
hi
after compiling the client does not start at all, I did everything according to the instructions from this forum, but for some reason the client does not work, I tried to run on different client builds, but nothing happened
- Stormax - 12-25-2022
Be sure this error is not from your LoginServer by the log
if it work fine and you use november client be sure your compile engine is good
if all is ok don't forget to change sl.dta and make sure your login port is correct.
- Tesebo - 12-25-2022
5 minutes ago, Stormax said:
Be sure this error is not from your LoginServer by the log
if it work fine and you use november client be sure your compile engine is good
if all is ok don't forget to change sl.dta and make sure your login port is correct.
everything is fine with the server, the client itself starts without an interface, it is only visible in the task manager after 5-10 seconds, it closes and there are no errors
- Stormax - 12-25-2022
Ah you use romain source.
Source of bin is bugged you need november source by pwesty and it will work ?
- Stormax - 12-25-2022
/index.php?/profile/22117-tesebo/&do=hovercard" data-mentionid="22117" href="/index.php?/profile/22117-tesebo/" rel="">@Tesebo Go to Reco_Csrc replace your bin by 2
It should work.
- Tesebo - 12-25-2022
54 minutes ago, Stormax said:
/index.php?/profile/22117-tesebo/&do=hovercard" data-mentionid="22117" href="/index.php?/profile/22117-tesebo/" rel="">@Tesebo Go to Reco_Csrc replace your bin by 2
It should work.
where to get Reco_Csrc because I don't have these sources
- Stormax - 12-25-2022
/index.php?/profile/22117-tesebo/&do=hovercard" data-mentionid="22117" href="/index.php?/profile/22117-tesebo/" rel="">@Teseboi say "reco_csrc" because is what i have but just put in your client source folder is the same
- Tesebo - 12-25-2022
It produces a lot of errors and does not compile
6 minutes ago, Stormax said:
/index.php?/profile/22117-tesebo/&do=hovercard" data-mentionid="22117" href="/index.php?/profile/22117-tesebo/" rel="">@Teseboi say "reco_csrc" because is what i have but just put in your client source folder is the same
- Stormax - 12-25-2022
/index.php?/profile/22117-tesebo/&do=hovercard" data-mentionid="22117" href="/index.php?/profile/22117-tesebo/" rel="">@Tesebo Show me
- Veni - 12-25-2022
You probably shouldn't replace your entire engine folder, idk what kind of help this is tbh. If your client still closes after removing the check for binary.lod then you have to attach a debugger while you're running the client.
For this you'd have to compile in debug and then either attach it to the process before it crashes or start the game via visual studio. This will require you to set the Nksp as startup project and setting the startup options for multiclient in visual studio.