+- LCKB (https://lckb.dev/forum)
+-- Forum: ** OLD LCKB DATABASE ** (https://lckb.dev/forum/forumdisplay.php?fid=109)
+--- Forum: Guides & Help Section (https://lckb.dev/forum/forumdisplay.php?fid=193)
+---- Forum: Tutorials & Guides (https://lckb.dev/forum/forumdisplay.php?fid=124)
+----- Forum: Ep1 Guides (https://lckb.dev/forum/forumdisplay.php?fid=178)
+----- Thread: HowTo Setup my Release (/showthread.php?tid=796)
- Nikolee - 05-05-2012
Hello Guys in this HowTo i will show you how you can start with my Starterpack
What you need :
- My Release :
2
-Navicat :
2
-Xampp :
2
- Some time
- And very important a Brain
So we start:
Config the DB:
1.Run Xampp and Start
-Apache (Be sure that Port 80 is open)
-MySql
2
-----------------------------------------------------------------------------------------------------
2.Start Navicat and Create a new MySql Connection.
2
2
-----------------------------------------------------------------------------------------------------
3. Create a new Database in Navicat.
(The same you do for newproject_db and newproject_db_auth)
2
2
-----------------------------------------------------------------------------------------------------
4. Insert the DB in Navicat.
Important: The Same you do for "newproject_db and newproject_db_auth"!
2
22
-----------------------------------------------------------------------------------------------------
5. Now youre Done with the DB only need to Create a Account =)
22
6. Now you need to set up the Sl.dta
-Go in my Client and run "IP Editor".
2
22
-----------------------------------------------------------------------------------------------------
Config the Server:
1. Extract the Server on your Computer.
2
-----------------------------------------------------------------------------------------------------
2. Go in the Connector Folder and rename "config.bin" to "newStobm"
2-----------------------------------------------------------------------------------------------------
3.Run the IP Tool.
2-----------------------------------------------------------------------------------------------------
4. Enter Your Username, Passoword and IP in it and Save it.
2
-----------------------------------------------------------------------------------------------------
5. Go in the Data Folder from GameServer and Copy the "newStobm" and put it in the Directory there the GameServer is.
2
2
-----------------------------------------------------------------------------------------------------
6. Go in the Connector folder and rename "newStobm" to "config".
2
-----------------------------------------------------------------------------------------------------
Now your Server should Work.
Enjoy playing =)
- Nikolee - 05-05-2012
I Hope that gonna Help you guys
- DevelopedRecords - 05-05-2012
You need to reopen ur download onto media fire pls it wont download for me
- RomainLastChaos - 05-05-2012
Nice guide +1
- eliza22 - 05-05-2012
THANK YOU - DANKESCHÖN FÜR DIE GUTE ARBEIT - NICE WORK NIKOLA
lg
Eliza22
- niki2812 - 05-05-2012
schreib mal pls Pn back !
- kang1290 - 05-06-2012
Hello Guys in this HowTo i will show you how you can start with my Starterpack
What you need :
- My Release :
2
-Navicat :
2
-Xampp :
2
- Some time
- And very important a Brain
So we start:
Config the DB:
1.Run Xampp and Start
-Apache (Be sure that Port 80 is open)
-MySql
2
-----------------------------------------------------------------------------------------------------
2.Start Navicat and Create a new MySql Connection.
2
2
-----------------------------------------------------------------------------------------------------
3. Create a new Database in Navicat.
(The same you do for newproject_db and newproject_db_auth)
2
2
-----------------------------------------------------------------------------------------------------
4. Insert the DB in Navicat.
Important: The Same you do for "newproject_db and newproject_db_auth"!
2
2
2
-----------------------------------------------------------------------------------------------------
5. Now youre Done with the DB only need to Create a Account =)
2
2
6. Now you need to set up the Sl.dta
-Go in my Client and run "IP Editor".
2
2
2
-----------------------------------------------------------------------------------------------------
Config the Server:
1. Extract the Server on your Computer.
2
-----------------------------------------------------------------------------------------------------
2. Go in the Connector Folder and rename "config.bin" to "newStobm"
2-----------------------------------------------------------------------------------------------------
3.Run the IP Tool.
2
-----------------------------------------------------------------------------------------------------
4. Enter Your Username, Passoword and IP in it and Save it.
2
-----------------------------------------------------------------------------------------------------
5. Go in the Data Folder from GameServer and Copy the "newStobm" and put it in the Directory there the GameServer is.
2
2
-----------------------------------------------------------------------------------------------------
6. Go in the Connector folder and rename "newStobm" to "config".
2
-----------------------------------------------------------------------------------------------------
Now your Server should Work.
Enjoy playing =)
AWESOME WORK...thanks!!!!!!!
- Darquise - 05-06-2012
I got an error:
Cannot connect Connector...0
pls help me
- Darquise - 05-06-2012
okay i fixxed this problem
- BayBay - 05-07-2012
Everything is working for me but i have a big problem
sadly when i make a new character im in the intro tutorial.I can kill mobs but cant get hit and sometimes the game server crashes and i cant go to juno.... is there a way to delete intro tutorial ????