Hanaro Event and Akan

[DeChamp3]

 

 
[Akan Temple]
LOW AKAN MIN :Byte:0027CD85
LOW AKAN MAX :Byte:0027CD90 
 
HIGH AKAN MIN :Byte:0027CDE7
HIGH AKAN MAX :Byte:0027CDF2 
 

Hanaro Event 
Channel_1 (byte) 0x00293CF3
Channel_2 (byte) 0x00293CFD
Level <= (byte) 0x00293D16
SkillID 0x00293D9D
SkillLvl 0x00293D95

 

 

to what do i have to set this to make akan be able to enter on level 1-170 as example? 

and to what i have to set hanaro event that it buffs on channel 1? i setted channel_1 and channel_2 to 01 both, but doesnt works.. to what do i have to set the Level?
 

 

i know how to edit but i dont know what value i need

 

 

[Wrong]

Just use the gs editor or if you any to do it manually go to those offsets and then find some site to pass decimal to hexadecimal and thats the value you need to put

[DeChamp3]

the decimal to hex isnt a problem, the problem is ive no idea what values to set

like for save runes 100% sucess u have to set 127.. wtf? why 127? why not 100 or 5 or 10 or what so ever

thats exactly the problem, the values just not making any sense and i tested like 4 hours different stuff without sucess :/

[Wrong]

because the rune rate isnt just a rate but a maths forume and it depends on the plus your stuff alredy have and that value was a byte or something like and its a byte and max value for a byte is 127 but it wont make the rate 100% still unless you know how to edit that formule

[Walletman987]

Has anyone ever tried going higher then 127?   Derp....

[Creep]

Probaly wont work, but there was a fix on it for ep2 us gs

 

maybe just research them offsets to get it over 127

[DeChamp3]

so to what exact values do i have to set those to make akan enterable for all levels

and the low level support be able to buff on all channel and all levels?

thats only thing i wanted i know :/