[LC-CMD] Commands

[Ih¢sãs123]

For the adminconsole commandwindow are very nice commands, to change the gamefeeling and let you see some new things. Here are some commands a little list not all.

How to open the commandwindow?
- You can use /whoami (if u have rights) or you activate the adminconsole (by address)
- open the commandwindow with "^"-Key
- look in the commandsspoiler and test the commands

(use at the first try /plr_fFOV=100 and you will see how it works)

(// is comment out and in german)

Commands

/cli_iFPSLimit            = (Standard 30)
/plr_fFOV                = (Standard 60)
/plr_fFrontClipDistance        = (Standard 0.25)
/plr_fFarClipDistance        = (Standard 500)
/ser_tmPingUpdate            = (Standard 3)
/fTickQuantum            = (Standard 0.05)

/dem_fRealTimeFactor        = (Standard 1)
/g_fGWTimeMul            = (Standard 1)

/g_fEffectDistance            = (Standard 100)
/plr_fSpeed            = Laufspeed
/plr_fSpeedUp            = attackSpeed

/net_tmConnectionTimeout        = (Standard 60)
/net_tmProblemsTimeout        = (Standard 5)
/net_tmDisconnectTimeout        = (Standard 60)

//Ausgaben
/MemoryReport()        //Memory Report
/MakeWorldStatistics()    //Erstellt eine Statistik über den gesetzten Sachen im Radar
/GAPInfo()        //Gibt ein paar daten aus
/Quit()            //schließt LC

//SKA
/ska_bShowSkeleton        = (Standard 0) //Zeigt bei 1 das Skellet an
/ska_bShowCollision        = (Standard 0)
/ska_bShowAllFrameBox        = (Standard 0)
/ska_bShowActiveBones        = (Standard 0)
/ska_bShowTriangles        = (Standard 0)

/gfx_bRenderModels        = (Standard 1)
/gfx_bRenderView            = (Standard 1)

/g_iShowReflectionMap        = (Standard 0) //Zeigt eine Minimap oben links mit den Spiegelungen
/ctl_b3rdPersonView        = (Standard 0)