failed to connect to loginserver

[DeChamp3]

For me it was, in fact, the sl.dta. Im using the client from the client section here. I solved the problem by exchanging the sl.dta with the one provided in this thread and by changing the IP with the IP Editor instead of the Check Tool.

 

ty but i did the same and still no sucess

 

i can think off im using the wrong ip.. but the eth0 ip is the right or not??

or maybe ports arent unlocked? but firewall is off so shouldnt be a problem or not..

maybe im starting them wrong? im using the run scripts.. ive changed nothing there

i really have no idea whats wrong.. the servers itself give no error, all runs perfect.. 

client sl.dta is saved right with ip editor, port is right

i tried toxics client and the one released in the file thread, ive tried to use this sl.dta 

i really have no idea why..

[myangel]

me  too i have  Change  all but  on Login i become time  out on putty  sad  me  TEST_LC Connector runn but  Login fail time  out  on client

[DeChamp3]

maybe my vmware network settings are wrong?

 

is this right: 2

[myangel]

pk i have  all but  i dont becom time  out  i become  failed to loginserver

[DeChamp3]

i found a solution.. use a old sl.dta from some other client (ive used old generic2 sl.dta), edit it in that client, then copy it to your ep3 client

[Paramount]

Hi.

As you got your answer, and your problem is solved, I am gonna move that topic to Solved section and mark it as solved.

 

Thanks,

 

-LCKB Staff